|
New Sabin chain |
|
|
|
|
|
|
|
INNOVATED INTEGRAL BRACKET
SUPPORTER
(Bracket + Guide Channel)
Applied to CR Type, N Type, E Type
|
|
CHARACTERISTIC AND MERIT OF NEW SABIN CHAIN
1 Cost-Saving Effect By Using The Plastic Material, As The Substitute With Previous
Expensive Material Such As Stainless & Aluminium.
2 Time-Saving Effect Of Installation By All-In-One Constitution.
No Need To Any Additional Extra Fee When Connecting With The Cable Chain.
3 Delivery Times saving because the extra designing process is unnecessary.
Installation with only the parts is feasible.
4 Technically renovated product which is
strong in breaking or chain deviation as the
Unity Systems supports the chain when installing
the Vertical Chain.
|
|
|
|
|
|
BRACKET TYPE |
|
G (Guide Channel Tyepe End Bracket) |
V (Vertical Guide Type End Bracket) |
F (Free End Bracket) |
|
|
|
|
|
DETAILS OF Unity Systems |
|
This type of bracket is to protect deflection of chain which will support the weight of
certain section start from bracket, also will protect the damage of chain. |
|
|
|
ASSEMBLING BY HORIZONTAL |
|
The interval may be adjusted with the keeping condition of straightness. |
|
|
Installable(O) |
|
Installable(O) |
|
|
|
|
|
|
|
|
ARTICLE NAME AND DE&TAILS OF NEW SABIN CHAIN |
|
|
1 FRAME (FR)
Connects the side bands (its structure is
Hinge Type), creates protection for cable and
application. CR-Type and N-Type use same
frame for both of them and E-Type has its
own frame. Patented teeth on frame are for
the fixing of divider's position.
|
|
nsb E-Type |
Hinge Type Frame |
|
2 SIDE BAND (SB)
A method connecting sidebands by holding pins holds curvature stress and minimizes
surface friction, so as to restrain dust and noise happening as well as to enforce
elastic force and durability of the product. |
|
3 DIVIDERS (DV)
Fixes the cable chain to the machinery or
moving application. CPS has improved
mounting efficiency by unifying the existing
Easy End Bracket and Normal Bracket. For
added strength, steel spacers are inserted
into the fixing holes of each Free End
Bracket. |
|
4 DIVIDERS (DV)
Dividers (vertical) divide the inner chamber of
the cable chain to give each cable diameter its
own center and keep the cables separate from
each other. (Available on S, R, M, T-Type) |
|
5 SEPARATORS (SP)
With separators available in lengths from 20mm
to 600mm, we are able to custom design the
most effective cable pattern for our clients.
forthermore, holes every 5mm to match the
5mm grooves in the frame, means creation and
application of complicated cable position,
which were never a possibility before, can now
become a reality giving you the exact cable
pattern you need to get the job done safely and
effecitively. |
6 TIE WRAP (TW)
Used to fix the cables in one straight line to prevent twisting during operation. There
are two types available depending on the application ; attached to bracket and
separated from bracket.
|
|
Separated from bracket (nsb045, 060, 075) |
Attach with bracket (nsb020, 022, 028, 035) |
|
|
7 SYSTEM TIE WRAP (STW)
Fixes the cable chain to the machinery or
moving application. CPS has improved
mounting efficiency by unifying the existing
Easy End Bracket and Normal Bracket. For
added strength, steel spacers are inserted
into the fixing holes of each Free End
Bracket. |
|
|
|
|
nsb - CR : CLEAN ROOM Type |
(Dimensions in mm) |
New Sabin Chain
CR Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
nsb - N : NORMAL TYPE |
(Dimensions in mm) |
New Sabin Chain
N Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
nsb - E : ENCLOSED TYPE |
(Dimensions in mm) |
New Sabin Chain
E Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
nsb - S : SLIDING TYPE |
(Dimensions in mm) |
New Sabin Chain
S Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
|
|
|
|
ORDERING |
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F : Free End Bracket
G : Guide Channel Type End Bracket
(Unity Systems)
V : Vertical Guide Type End Bracket
(Unity Systems)
T : Tie Wrap
S : System Tie Wrap |
Bending Radius |
Inside Width |
Clean Room Type |
New Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F:Free End Bracket
G:Guide Channel Type EndBracket
(UnitySystems)
V:Vertical Guide Type EndBracket
(UnitySystems)
T:Tie Wrap
S:System Tie Wrap |
Bending Radius |
Inside Width |
CleanRoomType |
New Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F : Free End Bracket
G : Guide Channel Type End Bracket
(Unity Systems)
V : Vertical Guide Type End Bracket
(Unity Systems)
T : Tie Wrap
S : System Tie Wrap |
Bending Radius |
Inside Width |
Enclosed Type |
New Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
End Bracket : B1, B2
T : Tie Wrap
S : System Tie Wrap |
Bending Radius |
Inside Width |
Sliding Type (S) |
New Sabin Chain |
|
|
|
|
|
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Clean Room Type |
|
The assembling process of CR-Type of New Sabin Chain is like below and you must use rubber
hammer with careful combination of Divider and Separator. |
|
|
1 Connect each side band as many as you need. |
2
Assemble the end brackets on both ends. |
3 Attach frames to one side groove on the frames, then
the other side. |
3-1 For nsb020CR and nsb022CR, they are not Hinge Type
for method to connect frames, but Hook Type on both
sides. |
4
For nsb 045, 060, and 075, connect the pin of separator
in hole of
divider after inserting separator in hole of divider.
For nsb028 and nsb035, separator fixing pins are not
used. |
|
|
|
5
Fix the separator and divider patterns to the bottom-side
frames as needed. |
6
Attach frames to one side groove on the frames, then
the other side. |
6-1
For nsb020CR and nsb022CR, they are not Hinge Type
for method to connect frames, but Hook Type on both
sides. |
7
Insert frame pins to secure the frames and complete
carrier. (nsb045, 060, 075 are applied with frame pin,
and nsb028, 035 are Hinge Type or Hook Type without
frame pin.) |
8
Complete to assemble New Sabin CR-Type, Sabin
Chain. |
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Normal Type |
|
The assembling process of N-Type of New Sabin Chain is like below and you must use rubber
hammer with careful combination of Divider and Separator. |
|
|
1 Connect each side band as many as you need. |
2
Assemble the end brackets on both ends. |
3 Attach frames to one side groove on the frames, then
the other side. |
3-1 028N, 035N Type are Hinge Frame Type. |
4
For nsb 045, 060, and 075, connect the pin of separator in
hole of
divider after inserting separator in hole of divider.
For nsb028 and nsb035, separator fixing pins are not used. |
|
|
|
5
Fix the separator and divider patterns to the bottom-side
frames as needed. |
6
Attach frames to one side groove on the frames, then
the other side. |
6-1
028N, 035N Type are Hinge Frame Type. |
7
Insert frame pins to secure the frames and complete carrier.
(nsb045, 060, 075 are applied with frame pin, and nsb028,
035 are Hinge Type or Hook Type without frame pin.) |
8
Complete to assemble New Sabin N-Type, Sabin Chain. |
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Enclosed Type |
|
The assembling process of E-Type of New Sabin Chain is like below and you must use
rubber hammer with careful combination of Divider and Separator. |
|
|
1
Connect each side band as many as you need. |
2
Assemble the end brackets on both ends. |
3
Attach frames starting with the bottom side of the carrier. |
3-1
028E, 035E Type are Hinge Frame Type. |
4
For nsb 045, 060, and 075, connect the pin of separator
in hole of divider after inserting separator in hole of
divider. For nsb028 and nsb035, separator fixing pins
are not used.. |
|
|
|
5
Fix the separator and divider patterns to the bottom-side
frames as needed. |
6
Fix the topside frames to the carrier. |
6-1
028E, 035E Type are Hinge Frame Type. |
7
Insert frame pins to secure the frames and complete
carrier. (nsb045, 060, 075 are applied with frame pin,
and nsb028, 035 are Hinge Type or Hook Type without
frame pin.) |
8
Complete to assemble New Sabin E-Type, Sabin Chain. |
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Sliding Type |
|
The assembling process of S-Type of New Sabin Chain is like below and you must use rubber
hammer with careful combination of Divider and Separator. |
|
|
1
Classify LH and RH first, then assemble the
Side band.
(Assemble from ?? to ?? according to priority) |
2
Connect the Side Band by the needed length. |
3
Install F.EB according to the right and left direction. |
4
Install M.EB according to the right and left direction. |
5
Assemble the Steel Bracket on the M.EB by tightening bolt
and nut.
(Bolt ?? flat washer ?? insert steel ?? flat washer ?? Nut) |
6
Assemble the left and right Side Band on specified frame. |
|
|
|
|
7
Frame in the opposite direction also assemble in
the same manner. |
8
Install the separators on dividers then fix by separate
pin. |
9
Fix the dividers on lower frame. (Assemble divider
every Four links) |
10
Combine the upper frame exactly on the groove of
sideband and divider. |
11
Fix the frame and side band by using the frame pin. |
|
|
|
12
Complete by inserting the reinforce washer to fit in direction
of F.EB fixing. |
|
|
|
|
|