|
New Sabin chain |
|
|
|
|
|
|
CHARACTERISTIC AND MERIT OF asb Chain |
|
1 THE QUIETEST CABLE CHAIN IN THE WORLD! |
2 LOW DUST CHAIN WITH MOST SUITABLE FOR CLEANROOM AREA! |
3 NEXT GENERATION CHAIN WITH ORIGINAL TECHNOLOGY! |
4 EASY ASSEMBLY |
|
Used M5 bolt with steel washers at FEB.
All frame and other components of nsb CR is common for asb CR. |
|
CR.L type : Frames are assembled at two links. |
|
|
|
|
|
|
1 Hinge Frame Type!
The hinge type frame is created by using the original frame (inserting frame pins) but locking
it into place with a ball hinge on one side and making the cables easily accessible by opening
the other. Available on New Sabin Chain CR-Type (except nsb020CR and nsb022CR), NType,
and E-Type (nsb028E and nsb035E). It can open to expose the inserted cables on
the topside and underside of the carrier. For nsb045, 060, 075(CR and N Type), frame pins
are inserted at both sides to secure the frames in order to prevent from frame open by
strong outside impact in any cases.
|
2 Effective Divider Use!
|
DV-R type for Rollor Divider and DV-M Type for
Divider using separator pin are applied to nsb045,
060, 075 Type. |
|
|
|
|
Damage to the cables and
get dust by the friction surface. |
Prevent damage to the cables and
reduce dust by rotating roller of dividers! |
|
Designed to use more effective due to use a three sort of dividers like DV-S Type for Side
Divider, DV-R Type for Roller Divider and DV-M Type for Divider using separator pin. DV-S
Type for side divider be installed at both side of inner Chain is to be fixed to end part of
separator. The separators are locked into place at each end by the fixing pin traveling
through the divider and through the separator respectively, locking it into place. this allows
for innumerous possibilities when designing the cable position and opens a door to virtually
unlimited combinations. the outer and roller dividers placed against the sidebands offet
more strength and more protection from side impact and strengthen the frame for resistance
of downward force caused by the weight of the inserted cables, especially in sliding applications.
also, dividers with roller which is attached the friction surface of divider and cable prevent
damage to the cables and reduce dust. |
3 Teeth Centered Every 5mm Eliminate
Movement During Operation!
With teeth positioned every 5mm, Sabin Chain's
patented grooves grip the dividers locking
them in place and eliminating any left or right
movement during operation. Furthermore,
your cables are protected from the shock of
outside force as the dividers are locked in
firmly and securely ensuring that each of your
cables center is held intact and preventing
sheathing caused by current systems' inability
to secure the dividers properly.
Stoppers can fall out or become damaged, resulting in more maintenance and down time.
With the Sabin Chain divider system, you eliminate the need for small excess parts which
can break and possibly gain entry to and damage operating machinery.
(applicable to the nsb028, 035, 045, 060, 075 type)
|
4 Diversity & Functionality Combine In
This new Separator
and Divider Creation!
|
Designed to create more options for customers, the combined
use of divider and fixing pin creates innumerous possibilities.
With separators available in lengths from 20mm to 600mm we
are able to custom design the most effective cable pattern for
our clients. Furthermore, holes every 5mm to match the 5mm
grooves in the frame, means creation and application of
complicated cable positions, which were never a possibility
before, can now become a reality giving you the exact cable
pattern you need to get the job done safely and effectively.
|
|
|
|
|
5 Applicable To Aluminum Frame 5 in Enclosed Type! |
It is specially developed to prevent cables more safely from welding line where excess
material can damage your inserted cables by applying aluminium frame to the exist new
sabin chain E-type. (applicable to the nsb045E, 060E, 075E type) |
|
6 Made Up Completely Sealed Chain With Subsidiary Parts! |
Any contaminants can't get into through the gap
of bracket by inserted subsidiary parts in the
FEB. |
|
|
Subsidiary part
Connection groove |
|
|
|
|
|
|
|
Insert subsidiary
(Up, Down) |
|
Side seal Structure |
|
7 Self-Supporting Length |
Self-supporting length is chain length(LS/2) which forms straight under set-up condition
of the chain and doesn't loose down depending on weight of inserted cables into the cable
chain. The Self-supporting length will be different on each models and in general, the bigger
size of chain is, the longer self-supporting length it has, so that the self-supporting length
must be checked when selecting chains to see if chain installment is available or not. |
|
8 Load Diagrams Self-Supporting Length |
Self-supporting length is chain length(LS/2) which forms straight under set-up condition
of the chain and doesn't loose down depending on weight of inserted cables into the cable
chain. The Self-supporting length will be different on each models and in general, the bigger
size of chain is, the longer self-supporting length it has, so that the self-supporting length
must be checked when selecting chains to see if chain installment is available or not. |
|
|
|
|
|
|
|
ARTICLE NAME AND DE&TAILS OF NEW SABIN CHAIN |
|
|
1 FRAME (FR)
Connects the side bands (its structure is
Hinge Type), creates protection for cable and
application. CR-Type and N-Type use same
frame for both of them and E-Type has its
own frame. Patented teeth on frame are for
the fixing of divider's position.
|
|
nsb E-Type |
Hinge Type Frame |
|
2 SIDE BAND (SB)
A method connecting sidebands by holding pins holds curvature stress and minimizes
surface friction, so as to restrain dust and noise happening as well as to enforce
elastic force and durability of the product. |
|
3 DIVIDERS (DV)
Fixes the cable chain to the machinery or
moving application. CPS has improved
mounting efficiency by unifying the existing
Easy End Bracket and Normal Bracket. For
added strength, steel spacers are inserted
into the fixing holes of each Free End
Bracket. |
|
4 DIVIDERS (DV)
Dividers (vertical) divide the inner chamber of
the cable chain to give each cable diameter its
own center and keep the cables separate from
each other. (Available on S, R, M, T-Type) |
|
5 SEPARATORS (SP)
With separators available in lengths from 20mm
to 600mm, we are able to custom design the
most effective cable pattern for our clients.
forthermore, holes every 5mm to match the
5mm grooves in the frame, means creation and
application of complicated cable position,
which were never a possibility before, can now
become a reality giving you the exact cable
pattern you need to get the job done safely and
effecitively. |
6 TIE WRAP (TW)
Used to fix the cables in one straight line to prevent twisting during operation. There
are two types available depending on the application ; attached to bracket and
separated from bracket.
|
|
Separated from bracket (nsb045, 060, 075) |
Attach with bracket (nsb020, 022, 028, 035) |
|
|
7 SYSTEM TIE WRAP (STW)
Fixes the cable chain to the machinery or
moving application. CPS has improved
mounting efficiency by unifying the existing
Easy End Bracket and Normal Bracket. For
added strength, steel spacers are inserted
into the fixing holes of each Free End
Bracket. |
|
|
|
|
nsb - CR : CLEAN ROOM Type |
(Dimensions in mm) |
New Sabin Chain
CR Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
nsb - N : NORMAL TYPE |
(Dimensions in mm) |
New Sabin Chain
N Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
nsb - E : ENCLOSED TYPE |
(Dimensions in mm) |
New Sabin Chain
E Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
nsb - S : SLIDING TYPE |
(Dimensions in mm) |
New Sabin Chain
S Type
|
Pitch |
Bending RadIus(R) |
Weight
kg/m |
Speed
m/sec |
Temperature
?? |
Clearance |
Frame
style |
Divider
possible
with frame |
|
|
|
|
|
|
|
ORDERING |
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F : Free End Bracket
FT : Tie Wrap
FST : System Tie Wrap |
Bending Radius |
Inside Width |
Clean Room Type (CR/ CR.L) |
Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F : Free End Bracket
G : Guide Channel Type End Bracket
(Unity Systems)
V : Vertical Guide Type End Bracket
(Unity Systems)
T : Tie Wrap
S : System Tie Wrap |
Bending Radius |
Inside Width |
Clean Room Type |
New Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F:Free End Bracket
G:Guide Channel Type EndBracket
(UnitySystems)
V:Vertical Guide Type EndBracket
(UnitySystems)
T:Tie Wrap
S:System Tie Wrap |
Bending Radius |
Inside Width |
CleanRoomType |
New Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
Bracket Type
F : Free End Bracket
G : Guide Channel Type End Bracket
(Unity Systems)
V : Vertical Guide Type End Bracket
(Unity Systems)
T : Tie Wrap
S : System Tie Wrap |
Bending Radius |
Inside Width |
Enclosed Type |
New Sabin Chain |
|
|
|
Q'ty(set) |
Length(mm) |
End Bracket : B1, B2
T : Tie Wrap
S : System Tie Wrap |
Bending Radius |
Inside Width |
Sliding Type (S) |
New Sabin Chain |
|
|
|
|
|
|
|
|
|
|
ASSEMBLY PROCEDURE / asb Clean Room Type |
|
The assembling process of CR-Type of asb Chain is like below and you must use rubber hammer
with careful combination of Divider and Separator. |
|
|
1 Always start assembling from Fixing bracket. |
|
2 Assemble (+)side band and (-)side band in
consecutive order. |
|
3 Evennumber of assembled side band :
In case of even number of links, Moving bracket
must be (+)bracket. |
|
3-1 Oddnumber of assembled side band :
In case of odd number of links, Moving bracket
must be (-)bracket. |
|
4 Complete to assemble asb Chain CR-Type,
Sabin Chain. |
|
|
|
|
ASSEMBLY PROCEDURE / nsb Clean Room Type |
|
The assembling process of CR-Type of New Sabin Chain is like below and you must use rubber
hammer with careful combination of Divider and Separator. |
|
|
1 Connect each side band as many as you need. |
2
Assemble the end brackets on both ends. |
3 Attach frames to one side groove on the frames, then
the other side. |
3-1 For nsb020CR and nsb022CR, they are not Hinge Type
for method to connect frames, but Hook Type on both
sides. |
4
For nsb 045, 060, and 075, connect the pin of separator
in hole of
divider after inserting separator in hole of divider.
For nsb028 and nsb035, separator fixing pins are not
used. |
|
|
|
5
Fix the separator and divider patterns to the bottom-side
frames as needed. |
6
Attach frames to one side groove on the frames, then
the other side. |
6-1
For nsb020CR and nsb022CR, they are not Hinge Type
for method to connect frames, but Hook Type on both
sides. |
7
Insert frame pins to secure the frames and complete
carrier. (nsb045, 060, 075 are applied with frame pin,
and nsb028, 035 are Hinge Type or Hook Type without
frame pin.) |
8
Complete to assemble New Sabin CR-Type, Sabin
Chain. |
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Normal Type |
|
The assembling process of N-Type of New Sabin Chain is like below and you must use rubber
hammer with careful combination of Divider and Separator. |
|
|
1 Connect each side band as many as you need. |
2
Assemble the end brackets on both ends. |
3 Attach frames to one side groove on the frames, then
the other side. |
3-1 028N, 035N Type are Hinge Frame Type. |
4
For nsb 045, 060, and 075, connect the pin of separator in
hole of
divider after inserting separator in hole of divider.
For nsb028 and nsb035, separator fixing pins are not used. |
|
|
|
5
Fix the separator and divider patterns to the bottom-side
frames as needed. |
6
Attach frames to one side groove on the frames, then
the other side. |
6-1
028N, 035N Type are Hinge Frame Type. |
7
Insert frame pins to secure the frames and complete carrier.
(nsb045, 060, 075 are applied with frame pin, and nsb028,
035 are Hinge Type or Hook Type without frame pin.) |
8
Complete to assemble New Sabin N-Type, Sabin Chain. |
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Enclosed Type |
|
The assembling process of E-Type of New Sabin Chain is like below and you must use
rubber hammer with careful combination of Divider and Separator. |
|
|
1
Connect each side band as many as you need. |
2
Assemble the end brackets on both ends. |
3
Attach frames starting with the bottom side of the carrier. |
3-1
028E, 035E Type are Hinge Frame Type. |
4
For nsb 045, 060, and 075, connect the pin of separator
in hole of divider after inserting separator in hole of
divider. For nsb028 and nsb035, separator fixing pins
are not used.. |
|
|
|
5
Fix the separator and divider patterns to the bottom-side
frames as needed. |
6
Fix the topside frames to the carrier. |
6-1
028E, 035E Type are Hinge Frame Type. |
7
Insert frame pins to secure the frames and complete
carrier. (nsb045, 060, 075 are applied with frame pin,
and nsb028, 035 are Hinge Type or Hook Type without
frame pin.) |
8
Complete to assemble New Sabin E-Type, Sabin Chain. |
|
|
|
|
|
ASSEMBLY PROCEDURE / nsb Sliding Type |
|
The assembling process of S-Type of New Sabin Chain is like below and you must use rubber
hammer with careful combination of Divider and Separator. |
|
|
1
Classify LH and RH first, then assemble the
Side band.
(Assemble from ?? to ?? according to priority) |
2
Connect the Side Band by the needed length. |
3
Install F.EB according to the right and left direction. |
4
Install M.EB according to the right and left direction. |
5
Assemble the Steel Bracket on the M.EB by tightening bolt
and nut.
(Bolt ?? flat washer ?? insert steel ?? flat washer ?? Nut) |
6
Assemble the left and right Side Band on specified frame. |
|
|
|
|
7
Frame in the opposite direction also assemble in
the same manner. |
8
Install the separators on dividers then fix by separate
pin. |
9
Fix the dividers on lower frame. (Assemble divider
every Four links) |
10
Combine the upper frame exactly on the groove of
sideband and divider. |
11
Fix the frame and side band by using the frame pin. |
|
|
|
12
Complete by inserting the reinforce washer to fit in direction
of F.EB fixing. |
|
|
|
|
|